Home | Home & Family | Home Improvement
There are many different home improvement projects that you may engage in as a homeowner. One of the most important tasks that you can engage in is repairing bathroom exhaust fans. These fans are ultimately responsible for ensuring the ventilation of the air in your bathroom. In addition to this, they actively allow moisture from the room to be completely removed. If this fan is not properly working, damage may occur. This damage may affect the flooring, the cabinets, the walls, and several other areas of the bathroom. In this home improvement guide, you will learn how to successfully repair the exhaust fan in your bathroom so that more expensive repairs are not required in the future. It is important to know and understand that there are certain signs that may occur that indicate a fan that ventilates the bathroom is not working properly. One of the most common signs is that the unit will begin to emit a very loud noise when in operation. You may also test to determine if air that is fresh is accumulating in the bathroom. Fans that are not working properly may not provide freshness to the air and it may appear stale. The last sign that the exhaust fan needs replaced is that it does not work at all. Prior to starting the home improvement project of repairing the bathroom exhaust fan, it is essential that you turn off the electricity that is being used to power the unit. In addition to this, it is important to wear protective safety equipment such as goggles and a facial mask in order to prevent debris from affecting your eyes, nasal cavity, and mouth while working with the fan. The first thing that you must do when conducting this particular home improvement project is to remove the fan cover. It is best to have one of two power tools. The first is an electric screwdriver with an assortment of bits, and the second is a drill. Either one of these power tools will help you remove the bits or screws that are holding the fan cover on. Be very careful when removing the cover to the exhaust fan. There could be a high level of debris behind the cover that could fall once the cover is removed and dropped down. The next step to repairing the fan that helps to eliminate moisture from the bathroom is to find the motor that goes to the fan. There should be a housing box located just beneath the blades of the fan. You will need to use the drill or electric screwdriver in order to remove the motor housing from the fan so that the motor is exposed. Once you are able to see the motor, disconnect the wires that are attached to the wiring harness. Once the motor housing has been removed, be certain to take the time to completely clean it. Once the housing is cleaned appropriately, you will likely see important information regarding the manufacturer and the motor that is used to power the bathroom exhaust fan. This information will help to ensure that you order the right fan for the unit that you have in your home. When your new fan motor arrives, all you have to do is reattach it to the housing case that you cleaned. Then, you will want to put the motor housing back together so that it makes one unit. The next step is to reattach it to the fan and place it back on the cover of the unit. Once this is completed, you will simply fit the unit back into the wall and/or ceiling of the bathroom and use your power tools to reattach it. Be certain that it is tight. If you want to engage in the home improvement project of repairing your bathroom exhaust fan, you can be successful by following these simple steps.
Article Source: http://www.urarticles.com
Jaime Masters is professional contractor and loves sharing his extensive knowledge of home improvement, construction and power tools. To read more about the things Jaime mentions and related topics, please visit hunter ceiling fan, hunter ceiling fans, and buy hunter ceiling fan, thank you.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
